We offer:One-year Warranty !Free Parts Exchanged ! Specifications:Weight: 6kg;Material: Stainless steel;Temperature setting range: 40 ~ 120 degrees Celsius;Drying time: 8 ~ 10 minutes;Heating power: 800W;Electrode power: 22 ~ 30W;Number of outlets: 30;Working voltage: 220V ± 10%;Outer diameter * height (the air duct is not counted): 400 * 400mm;Instructions: 1. Depending on the size of the glassware to be dried, insert the corresponding specification of the air duct into the air outlet of the top cover. 2.Turn the temperature control knob to the desired temperature. Plug in the power cord and turn on the power switch. Then the cold wind indicates that the green light is on, the engine is running to blow cold air. When the hot air switch is reactivated, the hot air indicates that the red light is on and hot air is blowing. When the air temperature reaches almost the set temperature, the hot air indicator is off, the heating stops (the blower motor continues to operate) and when the air temperature falls below set temperature, the hot air indicator lights up and the heating continues. 3.When the glassware is dry, first turn off the hot air switch, wait for the glassware to blow, then remove it and make sure the airflow is cold, then turn off the power switch. Attention tips: Do not turn off the power switch immediately after drying to avoid residual heat inside the appliance and burn the motor. Package list: 1 dryer + 30 ducts;
